#27.5

tag

Sea Otter Classic 2024: Hudski Bikes Doggler V3 – All the Updates

Reportage

Sea Otter Classic 2024: Hudski Bikes Doggler V3 – All the Updates

The Radavist thanks 1-Up USA for sponsoring our Sea Otter Classic 2024 coverage!

At Sea Otter Classic 2024, John caught up with Hudski Bikes to check out their new V3 Doggler prototype. If you recall, John loved the Hudski Doggler V2 he reviewed last year and made some mindful notes of what he’d change in the next version of this affordable jack-of-all-trades flat bar bike. Did Hudski read his notes? Read on to find out…

Double Feature Review: Alex and Nikki’s Starling Swoop Steel Full Suspensions

Reportage

Double Feature Review: Alex and Nikki’s Starling Swoop Steel Full Suspensions

The Swoop is Starling Cycles‘ versatile single-pivot steel full-suspension bike designed for 27.5 wheels. With its adjustable shock mounts, the Swoop can be set in “Trail” mode with 130 mm of rear travel or “Enduro” with 160 mm. Partners Alex and Nikki each have Swoops in respective enduro and trail modes that they’ve been riding for some time now. Below, they share a review of both iterations of this adaptable built-in-UK platform from one of our favorite bike makers

UPDATED 2024 Hardtails Under and Around $2000

Radar

UPDATED 2024 Hardtails Under and Around $2000

We’ll continue to update this list for 2024

Hardtails make the world go round. Especially here at The Radavist. We’ve been long-time supporters of these capable yet simple mountain bikes and as people decide on the “next bike” after reaching the limitations on their gravel bikes, we thought it’d be nice to compile a list of current hardtail models we dig, all under or around $2,000 so let’s get to it!

WTB’s Bailiff 27.5 x 4.5″ Fatbike Tires

Radar

WTB’s Bailiff 27.5 x 4.5″ Fatbike Tires

Fatbikes are often laid to the wayside by the bike industry, so when we come across a fatbike product, we have to share it. Case in point is WTB’s new Bailiff ($134.95) 27.5 x 4.5″ fatbike tires. These are available in standard and studded, with carbide studs pre-installed. Yet, both versions feature 312 stud pockets for unbeatable traction on ice. The Bailiff’s tubeless-ready 120tpi casing provides a supple ride feel, conforms to all surface conditions, and minimizes rotational weight. Its snow-specific compound remains soft at extremely cold temperatures to provide unparalleled traction on the most frigid days of the year.

Check out more at WTB.

To Switch Infinity and Beyond: A 27.5″ Yeti SB135 with SRAM Transmission Review

Reportage

To Switch Infinity and Beyond: A 27.5″ Yeti SB135 with SRAM Transmission Review

Curiosity. It’s a great trait to have as a cycling journalist. An inquisitive nature is what first prompted me to throw a leg around subculture-spawned bikes, like steel full-suspension 29ers and titanium hardtails, years ago. Sometimes, you have to pedal something for an extended period to whet that appetite for the occasional oddity that arises. If you’re lucky, those experiences challenge your preconceptions, too.

Working in bike media, it’s pretty easy to get cynical about all the marketing hype and the constant push for model years by the bigger brands, particularly regarding ever-changing drivetrain technologies, incremental gains, and complex suspension designs. I still value riding a rigid 29er as much as riding a vintage 26″ wheeled steel chariot through compromising terrain: the almighty underbiking ride keeps you honest, allows for honing your skillset, and can be damn fun.

Yet, on the flip side, I am attracted to high-tech, modern carbon bikes in small doses. Hence the allure of this Yeti SB135.

Before testing out the SB135, it had been a while since I’d ridden a carbon full suspension as, in the intervening years, I’ve been enjoying sampling the steel offerings out there from smaller, bespoke builders. Yet, the appeal of the high-tech is palpable—lighter, faster, smoother-shifting sounds fun, right? Mix in Yeti’s 27.5″ platform for the SB135, and my curiosity was piqued. The last 27.5″ wheeled bike I reviewed was the Santa Cruz 5010 and the previous 27.5″ wheeled bike I’d ridden was the Transition Scout that was loaned to me for a Moab trip. It was on that very trip I realized that while I admired the 27.5″ wheel platform, it wasn’t necessarily for me nor for the terrain I enjoy riding.

Yet, the SB135 was just strange enough, foreign enough, new-and-techy enough to have me put my steel sled with cable-actuated shifting aside for a few weeks and spend some time riding Yeti Turq and SRAM T-Type shifting…

Introducing the Ron’s Bikes x Crust Bikes Alumalith 27.5 ATB

Reportage

Introducing the Ron’s Bikes x Crust Bikes Alumalith 27.5 ATB

Good ol’ Ronnie. How many bikes have we shot together now? It all started with a chance encounter in Austin in 2014 when I documented his Trek 970. Back then, he was known as Benedict and dressed in his post-Wooly Mammoth roadie persona; lumberjack meets blast beats, sprinkled with some Tolkien lore and usually seen astride either a vintage MTB or a Rivendell, dribbling olive oil on his vintage Suntour components. This was early Ultraromance—the genesis of his persona—when he had just begun to crack open the internet with his wild style and über cøøl bikes. I love this man, no matter what name he festoons his internet crown with. Always have. Always will.

Fast forward to the 2022 Philly Bike Expo, where I recently met this gentle yet patinated gent once again to document a bike that picks up where our Duralcan post left off.

The Alumalith is the latest model to be released from the Ron’s Bikes x Crust Bikes cache and the first US-made aluminum bike he’s designed, with Frank the Welder at the helm, speccing tubing diameters and laying down iconic beads on brushed, raw aluminum. Let’s check it out below!

Trail Time with Breadwinner’s Bad Otis: A 160mm Travel 27.5 Shred Sled

Reportage

Trail Time with Breadwinner’s Bad Otis: A 160mm Travel 27.5 Shred Sled

Earlier this year, Locke Hassett had the pleasure of spending a few months riding Breadwinner Cycle’s Bad Otis. This modern 27.5-inch wheel hardtail – with snappy short 415mm chainstays, 66° headtube angle, and 160mm of front suspension – presented him with some interesting considerations about mountain bikes, the sport as a whole, and what it means to him. Continue reading below for Locke’s in-depth review of the Bad Otis, along with some other relevant revelations…

Rubber Baron Ronnie and His 650b Ultradynamico Crust Romanceür Canti

Reportage

Rubber Baron Ronnie and His 650b Ultradynamico Crust Romanceür Canti

What will soon be seven summers ago, Crust Bikes CEO Matt pedaled his prototype Evasion to the end of Long Island to catch a ferry across the Sound to where the fishing boat I was working on docked each evening. I readied the lines as the boat backed into the harbor.  Looking up, I could see a backlit figure of a cyclist above the docks in the parking lot— late summer setting sun illuminating orange and golds through course, untamed hair.  Chest hair.  We had been expecting each other…

The Cub House Builds: Sean’s Cösmic Cöw Ultra D Tribute

Reportage

The Cub House Builds: Sean’s Cösmic Cöw Ultra D Tribute

For as long as I can remember I have wanted to be an “Ultra”. Ultraromance and Ultratradition really have it all: the looks, the tan lines, the grey tires, the lycra, then the wool and the HAIR (don’t get me started on the hair!). Like most of you, I grew up watching these guys on TV and at the age of 15 I REALLY aspired to be the next Ultraromance when I grew up. I used to travel out to all their road races and got to see Ronnie COOL Romance win 8 road races in a single season wearing his stunning Team Wooly Mammoth colors. His category was called Cat 5, which he assured me was high up in the pecking order of athletic accomplishments.

René Herse Got a Big Shipment of Tires In

Radar

René Herse Got a Big Shipment of Tires In

If you’re one of the people patiently waiting for a model René Herse tires to land in stock, today is your lucky day. This morning the Seattle-based tire manufacturer just received a shipment of their most popular rubber including the 650B x 55 Umtanum Ridge, 700C x 35 Bon Jon Pass, the 26″ x 2.3″ Rat Trap Pass, and more. Head on over to René Herse to see the full stock availability.

2021 Concours de Machine: Jolie Rouge Cycles – Goat Rider

Reportage

2021 Concours de Machine: Jolie Rouge Cycles – Goat Rider

Today we’ve got another bike that was displayed at the French constructeur event, Concours de Machine. Built by Jolie Rouge Cycles, this all-mountain steel full suspension is outrigged with bags, racks, and more. As someone who owns a steel full suspension, it’s amazing to see the ante upped in this manner but that’s just the half of the weirdness that’s about to unfold for you so read on below for the builder of this bike, Julien Fritsch’s words and photos!

That Guy Has Style for Days: Gideon’s Madrean 27.5″ Hardtail

Reportage

That Guy Has Style for Days: Gideon’s Madrean 27.5″ Hardtail

Over the past year, I’ve had quite a few people roll through Santa Fe on road trips. Knowing Covid is still running rampant all up and down the Rockies, I usually opt for a meet-up outdoors. Whether that means for a cup of coffee or a bike ride, I like catching up with people but want to err on the side of safety these days. Last March, our good friend Gideon came through town with his new-to-him Madrean 27.5 hardtail. If you recall our Shop Visit with Madrean – and our older Shop Visit from 2013 with Cycles d’Autremont – then you’ll recognize Hubert d’Autremont’s handiwork…