#bike-racks

tag

Wish List Vol. 2 – Travel Made Easy

Radar

Wish List Vol. 2 – Travel Made Easy

Welcome to our second installment of Wish List, where Radavist contributors share their dreams of things that don’t exist, but maybe should. Some will be slightly niche but perfectly reasonable ideas that have every right to exist. Others will be impractical, expensive, and/or dangerous fantasies that probably should remain fantasies. Travis is back with another stack of requests, some of which go well beyond the bike industry.

2024 MADE Bike Show: Bike Rack Spotting!

Reportage

2024 MADE Bike Show: Bike Rack Spotting!

While the 2024 MADE Bike Show was filled to the brim with fantastic custom and bespoke builds, we needed to stretch our legs a bit and look outside the event facility as well. The bike racks around the event’s perimeter were filled with patina and beausage, contrasting the clean and polished builds inside the show. Did your bike make it into our Rack Spotting gallery? Check it all out below…

Wish List: Vol. 1 – Tools, Trucks, Bottles, and Butts

Radar

Wish List: Vol. 1 – Tools, Trucks, Bottles, and Butts

Welcome to the first installment of Wish List, where Radavist contributors share their dreams of things that don’t exist, but maybe should. Some will be slightly niche but perfectly reasonable ideas that have every right to exist. Others will be impractical, expensive, and/or dangerous fantasies that probably should remain fantasies. Travis dives in first with a list that spans this spectrum quite nicely.

Radar

Bike Rack Geometry Comparison | RambleRack® VertLock™ Technology

Our friends at RIGd Supply just launched this RambleRack video as a companion to their Bike Rack Geometry Comparison, showcasing VertLock™ Technology.

RIGd states that the RambleRack® Heavy Duty Hitch Bike Rack is the world’s safest bike rack. Patent pending VertLock™ geometry keeps your bike locked in the rack regardless of the bike’s tire pressure or any amount of extreme driving.

RambleRack can hold up to 150 lbs of bike per tray, keeping even the heaviest e-bikes safe and secure. No matter where you take your bikes, RambleRack® is Built to Ramble™

Learn more about the RambleRack at RIGd.

February’s Group Ride Giveaway: A Rig’d RambleSwing™ for Your Car

Radar

February’s Group Ride Giveaway: A Rig’d RambleSwing™ for Your Car

We’ve partnered up with Rig’d to give away a RambleSwing™, a $799 value, for our February Group Ride giveaway! Sign up by February 29th for your chance to win!

When it comes to bomber, made-in-the-USA bike racks, and swingouts, Rig’d is a leader of innovation. The brand’s RambleSwing™ adds the utility of a swing-away hitch to your bike rack of choice. Built by RiG’d Supply in the US of A, these swing-outs enable better access to the rear of your car by swinging away to the passenger or driver’s side. Available in a 2″ or 2.5″ receiver hitch.

Check out Josh’s review for an in-depth look at the RambleSwing™.

Due to the weight of this month’s giveaway, outside of the US and Canada shipping charges may apply.

Check this post out for all the information on how to join Group Ride for $6.66/month or $69.69/year.
SIGN UP HERE.

 

Keepers of the Flame: Shop Visit and Interview With Smith Levi of RatKing Frames

Reportage

Keepers of the Flame: Shop Visit and Interview With Smith Levi of RatKing Frames

Smith Levi, of RatKing Frames, has been dedicated to making frames and bicycle cargo accessories that merge fun and function for a decade. After getting started in Oakland, California in 2013, RatKing has since migrated north to Seattle, Washington and is a founding member of the creative collective Stunt Doubles. Andrew Johns recently had a chance to stop in the space for a chat with Smith and, below, shares a conversation that spans from the idea behind Stunt Doubles, to RatKing’s design inspiration and obsession with process, and Smith’s current offerings.

Preorders are Open For the RiG’d Supply RambleSwing: Reviewing the First Bike Rack Swingout with 300lb Capacity

Radar

Preorders are Open For the RiG’d Supply RambleSwing: Reviewing the First Bike Rack Swingout with 300lb Capacity

Known for the Ultraswing spare tire and accessory swing out, in addition to the RambleRack bike rack, Southern California-based RiG’d Supply makes hitch racks that are burly enough for off-road use, yet convenient and intuitive for everything else. Today, RiG’d announced a preorder for their newest product, the RambleSwing, which is the first swingout for bike racks we’ve seen to boast a 300-pound carrying capacity in addition to a list of other clever features. Josh got his hands on a prototype RambleSwing a few weeks ago and, below, offers a look at some highlights and fitment considerations using his F-150 and 1UP USA Super Duty 4-bike rack.

A Long-Term Review of the 1UP USA Recon 5 Bike Rack and RakAttach 2.0

Reportage

A Long-Term Review of the 1UP USA Recon 5 Bike Rack and RakAttach 2.0

In early 2022, Wisconsin-based bike rack manufacturer 1UP USA purchased Recon Racks and began offering the Recon 5 and Recon 6 for, you guessed it, carrying five and six bikes respectively on a single vehicle. With attractive features such as no frame/fork contact with the rack, off-road rating, Smooth Pivot recline, and accommodation for a variety of tire and bike sizes, our interest was piqued. Josh has been testing a Recon 5 for the better part of a year, taking it everywhere from Arizona’s remote forest roads to local shuttle runs and cross-country road trips. 1UP also recently redesigned their RakAttach swing-out adapter, which Josh has been using in tandem with the Recon. Continue reading below for a full rundown on these new offerings from 1UP…

Yakima’s New HangTight 4 and 6 Vertical Bike Rack

Radar

Yakima’s New HangTight 4 and 6 Vertical Bike Rack

Inspired by North Shore, Lolo, and other racks made in house, the Yakima HangTight system is a mass-produced option with greater distribution. The new HangTight 4 and HangTight 6 are designed to store your bikes vertically for transport, making it easier to carry more bikes in less space, straight off the back of your car equipped with a 2″ receiver hitch. These racks are slated for an 11/15/21 release on Yakima.com and select retailers.

Specs:
-Transports up to 6 flat bar Bikes or 4 drop bar bikes using minimal space​
-Securely supports most road, mountain, kids, and cruiser bikes by the handlebar
-Fully padded cradles protect your handlebars, including carbon bars
-Rotating rear wheel cup fits a wide range of wheelbases up to 50″
-Accommodates bikes up to 37.5 lbs. each
-Holds 20″-29″ tires up to 5″ wide
-Add your own bike lock to the integrated lock loop for greater bike security
-Foot-operated tilt mechanism makes it easy to access the rear of the vehicle
-Dual cradle retention stabilizes and protects bikes from one another.
-HitchLock included
-Built-in bottle opener—cheers!
-Fits 2″ hitch receivers only
-NOT compatible with the Yakima BackSwing and StraightShot
-Not compatible with aero handlebars, clip-on aero bars, or handlebars larger than 35mm in diameter
-Transport dual-crown fork bikes with the HangTight DH Cradle accessories (sold Seperatly)

1-Up USA’s New Equip-D Double Bike Rack Review: Used, Abused and Still Clicking

Reportage

1-Up USA’s New Equip-D Double Bike Rack Review: Used, Abused and Still Clicking

Four wheelin’ and cycling are not exactly a common pairing yet this merging of two hobbies for me creates all kinds of interesting problems to solve. For instance, finding a bike rack that lives up to the same standards as my truck’s other accessories. From the roof top tent’s aluminum structure, to the steel bumpers and other body armor. I need a rack that can take a few hits and keep on tickin’… or in this case, clickin’. That’s where 1-Up USA’s newest model, the Equip-D double bike rack comes into play.

The RIGd UltraSwing Hitch Carrier Multi-Fit Works With All 2″ Receivers

Radar

The RIGd UltraSwing Hitch Carrier Multi-Fit Works With All 2″ Receivers

Got a vehicle that needs to carry a spare tire on the back but you’ve gotta carry a bike rack too? Well, if it has a 2″ receiver, the RIGd UltraSwing Hitch Carrier Multi-Fit fits all vehicles now. The original UltraSwing only fit the 4th/5th gen 4Runner but the Multi-Fit works with just about any vehicle with a 2″ receiver. The offset receiver hitch keeps the bikes away from your spare tire and when you need to get into the back of your vehicle, it swings away, making access easy. See more at RIGd.

A Shout Out to North Shore Racks!

Radar

A Shout Out to North Shore Racks!

When it comes to carrying a lot of mountain bikes, few racks can match the North Shore Rack. While there are many options for carrying capacity from the brand, this post will only address the 6-bike NSR design, since it’s the only one I’ve ever used personally. Granted, the 4-bike NSR will also apply here, since it’s a very similar design. After our Nevada Highway 50 MTB trip, I was impressed with the versatility of this unique rack design. The North Shore Rack carries mountain bikes and mountain bikes only. Due to its fork crown hanger, it has to attach to modern MTB fork crowns, not road bike forks. Yes, it’ll work on rigid forks too!

RockyMounts’ BackStage Swing Away Rack Makes Road Trips Easier – Locke Hassett

Radar

RockyMounts’ BackStage Swing Away Rack Makes Road Trips Easier – Locke Hassett

RockyMounts’ BackStage Swing Away Rack Makes Road Trips Easier
Words and photos by Locke Hassett

Living in my truck a few months out of the year with 2+ bikes just got a whole lot easier thanks to the BackStage Swing Away Rack from Boulder, CO based RockyMounts. For the past few years, I have been utilizing my truck bed as a mobile studio apartment while driving all over the American West, including my twice a year migration between Montana and Arizona. Usually, I throw an old sleeping pad over my tailgate and pile my bikes into the back with the front wheels hanging out. Sure, this works, but it is cumbersome to transition into kitchen/bed mode and my tailgate and forks don’t love this method either. It was time for a change.