The Radavist

How far would you travel for a bikepacking trip with new friends? Framebuilder and bladesmith Thomas Callahan of Horse Cycles drove from New York to Colorado for a summertime multi-day ride with Krysten Kohn and Sean Greene. Join Thomas on an unforgettable trip to Aspen Ridge…

We’re here in Portland, covering the 2023 MADE Bike Show, looking for bikes that we thought you, the readers of The Radavist would appreciate. Josh and John have been scouring the halls of the show for bikes to document, and we’ve got Part 05 of our coverage for you to enjoy…

Thanks to 1-Up USA for sponsoring our continued 2023 MADE Bike Show coverage!

Every summer, ENVE Composites hosts a massive open house at their HQ in Ogden, Utah with an accompanying gravel ride. The 2023 ENVE Grodeo, which went down just one week ago,  featured an impressive list of 24 frame builders from around the world. Spencer Harding was on the ground documenting all of the beautiful bicycles and riding festivities and, below, he presents Part One of his event recap with a stacked gallery of bikes, some snapshots from the builder ride, and Trackline time trail at the Grodeo. Let’s get to it!

We first began featuring Reader’s Rides back in 2011; since then these part-review, part-vignette reader submissions have become a beloved weekly fixture here on The Radavist. This year’s Top Ten Readers’ Rides feature both brand new builds and older frames full of stories that have been given new life. As always they are 100% audience-submitted and the builds highlighted here were chosen based on web traffic and engagement. We love receiving submissions each week so if you have been on the fence about submitting your ride, perhaps this list will motivate you to break out the camera and show off your rig. Read on for some choice submissions from 2022…

It’s that time of year again! The Chris King Open House returned to Portland this past weekend and, with it, a showcase of seventeen custom bikes. Let’s check them out in detail below!

Last year, ENVE opened its doors to the public for an Open House event. Once inside, visitors took a tour of its Ogden, Utah facilities and were greeted by two-dozen custom bikes from builders across the globe. This year the pandemic forced ENVE to pivot a bit, holding a virtual tour and framebuilder showcase they’re calling the Builder Round-Up. We’re pleased to once again host this showcase, with two-part coverage, so read on below for a full breakdown on these Beautiful Bicycles along with a few teasers of new ENVE product…

Remember that Horse Cycles Shop Visit that Ian and Kevin from ENVE worked on for the Radavist last year? It featured Kevin’s Horse Cycles all-road that was an homage to the late Ezra Caldwell – may he ride in peace! Well, Kevin was just in Bozeman for the Swift Campout – which unfortunately got snowed out – so he made the best of the 7-hour drive up from Salt Lake City and spent the extended weekend riding MTB trails on his newly converted Horse Cycles.

Inside / Out at Horse Cycles

Photos by Ian Matteson, words by Kevin McClelland from ENVE

The Idea for this bike and trip transpired from a casual conversation at NAHBS in Hartford.  I approached Thomas from Horse Cycles at his stunning booth filled with some of my favorite bikes at the the show and we began talking about the yet to be released ENVE Gravel Fork and Gravel Bar. Thomas quickly started to show me photos of his freshly built cabin in Upstate New York surrounded by a beautiful landscape littered with some amazing gravel roads. That was the moment I knew I wanted to get out to New York for some riding with him and I knew I wanted it to be on a Horse Frame.

Each year at NAHBS, a selection of builders at the show lament on how we should actually ride bikes together more, not just talk about them once a year at the show. I get it. Sitting in a convention center, under that horrible lighting, discussing how a bike rides is worlds apart from actually riding out on the trails. This year, Adam Sklar took the initiative to plan a weekend and then some of fun times in Bozeman and sent out an open invite to numerous builders. His idea was to expose people to the culture here, the town’s local builders, eats, drinks, and shops, in an event playfully dubbed the “Builder’s Camp.” Squid, Breadwinner, Retrotec, Falconer, Horse, Alliance, and Strong, along with a few other locals, all prepared for 5 days of non-stop riding and relaxing in this beautiful mountain town.

Horse Cycles Hell Cat Hardtails

I’ve always loved the aesthetic of what Thomas Callahan at Horse Cycles produces in his Brooklyn-based workshop. Over the past few years, he and his team have pulled together some beautiful frames. For the Builder’s Camp, Thomas and his friend Nik came out to Bozeman with these two Hell Cat hardtails. These bikes are 27.5+ “East Coast Rippers.” With a 66.5º head angle, designed for 130-150mm forks, and room for 3” tires. Each there are options for the seatstays, downtube, and paint colors. For the stays, a wishbone with scalloped ends is an option. No matter what the tubing selection or details you end up choosing, the work of Ben Falcon Paint will give your bike a unique look with empeccable detailing.

The Hell Cat hardtails start at $2,100 for a frame, plus a fork of your choosing. Head to Horse for more details.

____

Follow Horse Brand on Instagram and follow along with the #BuildersCamp hashtag.

When a frame builder has access to an in-house graphics department and paint booth, great things happen. Thomas from Horse Cycles‘ partnership with Ben Falcon has really paid off. Ben’s paint mixed with Horse’s frame design and construction delivers show-stopping road bikes like this.