#Tomii-Cycles

tag

2023 MADE Bike Show Coverage: Part 05 – Amigo, Black Magic, Chumba, Coconino, English, Horse, Liberation Fab, Manzanita, Sklar, and Tomii

Reportage

2023 MADE Bike Show Coverage: Part 05 – Amigo, Black Magic, Chumba, Coconino, English, Horse, Liberation Fab, Manzanita, Sklar, and Tomii

We’re here in Portland, covering the 2023 MADE Bike Show, looking for bikes that we thought you, the readers of The Radavist would appreciate. Josh and John have been scouring the halls of the show for bikes to document, and we’ve got Part 05 of our coverage for you to enjoy…

Thanks to 1-Up USA for sponsoring our continued 2023 MADE Bike Show coverage!

The Radavist’s Top 10 Readers’ Rides of 2021

Radar

The Radavist’s Top 10 Readers’ Rides of 2021

2021 was an exceptional year for our Readers’ Rides series, which we first began posting back in 2011. Last year’s readership-submitted bikes ran the gamut, much like our Top 10 Beautiful Bicycles, but Readers’ Rides is 100% audience-submitted. We love receiving submissions each week so if you were on the fence about submitting your ride, perhaps this list will motivate you to break out the camera. This list was compiled by web traffic and comments. Let’s check out the Top Ten Readers’ Rides of 2021 below, in no particular order…

A Tomii Cycles… Roof Rack?

Radar

A Tomii Cycles… Roof Rack?

Nao Tomii loves to design racks. Racks for his Fat Canvas custom bikes and in this case, for his Renault 4. When Nao posted this on his Instagram, we reached out to see if he’d send some photos to us. He did and so we’re here, sharing this beautiful creation. Check out some more photos below.

The 2021 ENVE Builder Round Up: Chumba, Falconer, Firefly, Mariposa, Scarab, Sklar, Tomii

Reportage

The 2021 ENVE Builder Round Up: Chumba, Falconer, Firefly, Mariposa, Scarab, Sklar, Tomii

It’s that time of year again! ENVE’s Open House, aka the Builder Round-Up and Grodeo event is this weekend in Ogden, Utah, so I packed up my bike portrait kit and drove up through beautiful summer monsoons to document a selection of bikes from this year’s event. Check out a thoroughly documented stable from the Round Up below, beginning with Chumba, Falconer, Firefly, Mariposa, Scarab, Sklar, and Tomii…

Tomii Cycles Showcase: Elvin’s Sportif Pass Hunter

Reportage

Tomii Cycles Showcase: Elvin’s Sportif Pass Hunter

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so we’re doing just that…

Tomii Cycles Showcase: Kevin’s Gravel Packer

Reportage

Tomii Cycles Showcase: Kevin’s Gravel Packer

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so this week, we’re doing just that. Here’s Kevin’s Gravel Packer, complete with paint by Jordan Low and Andrew the Maker bags…

Tomii Cycles Showcase: Fat Canvas for SRAM

Reportage

Tomii Cycles Showcase: Fat Canvas for SRAM

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so this week, we’re doing just that…

Tomii Cycles Showcase: Blake’s Gravel Hunter

Reportage

Tomii Cycles Showcase: Blake’s Gravel Hunter

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so this week, we’re doing just that, beginning with Blake’s Gravel Hunter, complete with custom Andrew the Maker bags and a stunning paint job by Jordan Low. Sit back and enjoy clicking through these beautiful photos of an equally as beautiful bicycle…

Nao’s Own Tomii Cycles Chubby Road

Reportage

Nao’s Own Tomii Cycles Chubby Road

Yesterday we took a deep dive into the shop of Tomii Cycles. Typically, builders use their own bikes to experiment and explore ideas, concepts, and construction techniques they’ll later use on their client’s bikes. This reasoning is why I always gravitate towards a builder’s own bike when I’m visiting a shop.

A Look Inside the Austin, Texas Workshop of Tomii Cycles + An Interview with Nao Tomii

Reportage

A Look Inside the Austin, Texas Workshop of Tomii Cycles + An Interview with Nao Tomii

My first experience with Nao Tomii from Tomii Cycles was via his old brand, 3RRR, which focused on small components like chainrings, developed in part with industrial design office 44RN. While in Boston, he learned to build bikes under the instruction of Ian Sutton, from Icarus Frames. When he moved to Austin shortly after, I began seeing his bikes pop up all over town, each beautifully constructed and specced, with color palettes so unique to the cycling industry’s normal flashy vibrancy. Nao has an eye for design, proportions, and a willingness to strive for perfection. His work is wildly underappreciated in the saturated market of handmade frames.